The PP Screwed End Ball Valve is utilized in different industries for controlling the flow of various gases and liquids. These valves have a screwed lock at end and is locked in the position for safe operation.
| Material Of Construction | PP (Polypropylene) | Construction | 3 piece design, 1 piece stem (spindle), full bore, Teflon seated |
|---|---|---|---|
| Design | 3 piece design | Test pressure | 08 kg./cm2 |
| Max working temp | 70 c (consistently) | Size Range | ½"- 15MM TO 100MM- 4” |
| Connection End | Screw end (BSP thread) | Standard | As per manufacturer |
| NO. | DESCRIPTION | QTY. | MATERIAL |
|---|---|---|---|
| 1) | Flanged end | 2 | Polypropylene |
| 2) | Body | 1 | Polypropylene |
| 3) | Ball | 1 | Polypropylene |
| 4) | Stem/Spindal | 1 | Polypropylene With M.S. /S.S |
| 5) | Seat Ring | 2 | PTFE (TEFLON) |
| 6) | Body"O"Ring | 2 | Neoprene |
| 7) | Stem Seal Ring | 1 | PTFE (TEFLON) |
| 8) | Stem "O" Ring | 1 | Neoprene |
| 9) | Stud, Nut & Washer | REQ | M.S. Zinc Plated/S.S |
| 10) | Nut Cap | REQ | Polypropylene. |
| 11) | Handle | 1 | M.S. PP Coated. |
| 12) | Handle Hex. Pin | 1 | M.S./ S.S. |
| 13) | Handle Cap | 1 | Polypropylene. |
| Size | L | OD | ID | H1 | |
|---|---|---|---|---|---|
| In. | MM | ||||
| 1/2" | 15MM | 115 | 30 | 13.5 | 130 |
| 3/4" | 20MM | 126 | 35 | 19 | 131 |
| 1" | 25MM | 123 | 45 | 24.5 | 165 |
| 1 1/2" | 40MM | 154 | 65 | 38 | 197 |
| 2" | 50MM | 178 | 76 | 50 | 200 |
| 2 1/2" | 65MM | 206 | 94 | 63.5 | 255 |
| 3" | 80MM | 222 | 107 | 75 | 255 |
| 4" | 100MM | 273 | 134 | 100 | 350 |
